Epson BrightLink 455Wi User Manual

30 Connecting to Computers, USB Devices, and Other Equipment
Connecting an RGB Video Source
You can connect to an RGB video source using a VGA computer
cable, which you can purchase from a computer or electronics store.
1. Connect the cable to the RGB video port on your player and the
Computer1 or Computer2 port on the projector.
2. You may need to change the
Input Signal setting in the
projector’s Signal menu to
RGB (see page 88).
3. If you want to play sound through the projector, see page 31 for
instructions on connecting audio cables.
4. When you’ve finished making connections, see page 38 for
instructions on turning on the projector and page 41 for
instructions on displaying and adjusting the image.
Once the projector is turned on, select the image source by
pressing the
Source Search button on the projector or remote
control.
Connect to RGB
video source
Connect to RGB
video source

Epson BrightLink 455Wi Specifications

Projection

white light output	2500 lumens
color light output	2500 lumens
native resolution	1280 x 800 (WXGA)
throw ratio range (16:10)	0.37 – 0.50
throw ratio range (4:3)	0.44 – 0.59
throw ratio range (16:9)	0.37 – 0.50

Lamp Specifications

lamp type	E-TORL 230 W UHE
lamp life (ECO mode)	up to 3500 hours
lamp life (normal mode)	up to 2500 hours

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz
power consumption	363 W
network on standby power	10 W
network off standby power	0.3 W

Operating Environment

operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	35 dB
fan noise (ECO mode)	28 dB

Weight and Dimensions

dimensions	14.5" x 19.0" x 6.1" (W x D x H)
weight with slide plate	14.1 lb
weight without slide plate	12.9 lb