EasyManuals Logo
Home>Epson>Projector>BrightLink 455Wi

Epson BrightLink 455Wi User Manual

Epson BrightLink 455Wi
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
Solving Problems 139
Solving Projector Operation Problems
The power doesn’t turn on.
If the projector doesn’t turn on when you press the Ppower
button, make sure the power cord is connected to the projector
and plugged into a working electrical outlet.
The power cord may be defective. Disconnect the cord from the
outlet and contact Epson as described on page 155.
If you’re using the Direct Power On function and you
immediately plug the power cord back in after unplugging it, the
power may not turn back on. Press the Ppower button to turn
the projector back on.
The buttons on the projector don’t work.
If the Control Panel Lock function has been enabled, you can’t use the
buttons on the projector. Try using the remote control instead, or
press and hold the projector’s
Enter button for seven seconds to
release the lock (see page 97).
You are having trouble projecting through the USB cable
connection.
Press the USB button on the remote control.
If the USB Display driver is not installed automatically the first
time you connect the cable, do one of the following:
Windows: Double-click
Computer or My Computer >
EPSON_PJ_UD > EMP_USDE.EXE.
Mac OS: Double-click
EPSON_PJ_UD > USB Display
Installer
.

Table of Contents

Other manuals for Epson BrightLink 455Wi

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson BrightLink 455Wi and is the answer not in the manual?

Epson BrightLink 455Wi Specifications

Projection IconProjection
white light output2500 lumens
color light output2500 lumens
native resolution1280 x 800 (WXGA)
throw ratio range (16:10)0.37 – 0.50
throw ratio range (4:3)0.44 – 0.59
throw ratio range (16:9)0.37 – 0.50
Lamp Specifications IconLamp Specifications
lamp typeE-TORL 230 W UHE
lamp life (ECO mode)up to 3500 hours
lamp life (normal mode)up to 2500 hours
Power IconPower
power supply voltage100 – 240 V ±10%, 50/60 Hz
power consumption363 W
network on standby power10 W
network off standby power0.3 W
Operating Environment IconOperating Environment
operating temperature41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)35 dB
fan noise (ECO mode)28 dB
Weight and Dimensions IconWeight and Dimensions
dimensions14.5" x 19.0" x 6.1" (W x D x H)
weight with slide plate14.1 lb
weight without slide plate12.9 lb

Related product manuals