EasyManuals Logo

Epson BrightLink 455Wi User Manual

Epson BrightLink 455Wi
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
Using the Projector Menus 95
7. Press the Menu button, then press Enter to exit the screen.
8. Turn off and unplug the projector.
Starting the Projector With a Password
When the password function is enabled, you see this screen when you
plug in and turn on the projector:
Hold down the
Num button and use the numeric keypad to enter the
four digit password.
The password screen closes and projection begins.
If projection does not begin, check the following:
If the password is not correct, you see a message prompting you to
re-enter the password. If you enter an incorrect password three
times in succession, you see an error code with the message
The
projector’s operation will be locked
and the projector switches
to standby mode. Write down the error code, then disconnect the
projector’s power cord from the electrical outlet, reconnect it, and
turn the projector back on. Try entering the correct password
again.
If you have forgotten the password, contact Epson with the
request code number that appears in the Password screen for
assistance. See “Where To Get Help” on page 155.
If you enter an incorrect password 30 times in succession, the
projector remains locked and you must contact Epson to arrange
for service.
note
If you leave the projector
p
lugged in, the Password
screen will not appear. It
appears only if you unplug
and reconnect the power
cord.

Table of Contents

Other manuals for Epson BrightLink 455Wi

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson BrightLink 455Wi and is the answer not in the manual?

Epson BrightLink 455Wi Specifications

Projection IconProjection
white light output2500 lumens
color light output2500 lumens
native resolution1280 x 800 (WXGA)
throw ratio range (16:10)0.37 – 0.50
throw ratio range (4:3)0.44 – 0.59
throw ratio range (16:9)0.37 – 0.50
Lamp Specifications IconLamp Specifications
lamp typeE-TORL 230 W UHE
lamp life (ECO mode)up to 3500 hours
lamp life (normal mode)up to 2500 hours
Power IconPower
power supply voltage100 – 240 V ±10%, 50/60 Hz
power consumption363 W
network on standby power10 W
network off standby power0.3 W
Operating Environment IconOperating Environment
operating temperature41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)35 dB
fan noise (ECO mode)28 dB
Weight and Dimensions IconWeight and Dimensions
dimensions14.5" x 19.0" x 6.1" (W x D x H)
weight with slide plate14.1 lb
weight without slide plate12.9 lb

Related product manuals