EasyManuals Logo
Home>Epson>Projector>BrightLink 455Wi

Epson BrightLink 455Wi User Manual

Epson BrightLink 455Wi
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
40 Displaying and Adjusting the Image
Shutting Down the Projector
This projector incorporates Instant Off technology. To turn it off, you
can press its Ppower button as described below, unplug it, or turn off
a power switch that supplies power to the projector. You don’t have to
wait for the projector to cool down first.
1. To turn off the projector, press the Ppower
button on the remote
control or projector.
You see a confirmation message.
(If you don’t want to turn it off,
press any other button.)
2. Press the Ppower button again. The projection lamp turns off
and the projector beeps twice. You can then unplug the power
cord.
If you want to turn the projector on again, make sure the orange
Ppower light is not flashing, then press the Ppower button.
note
Lamp life will vary
depending upon mode
selected, environmental
conditions, and usage.
Turn off this product when
not in use to prolong the life
of the projector.
You can set the projector to
automatically turn off the
lamp and enter “sleep mode”
when it has not received any
signals for 1 to 30 minutes
(see page 92). This conserves
electricity, cools the
projector, and extends the
life of the lamp. If you want
to start projecting again,
press the P power button.

Table of Contents

Other manuals for Epson BrightLink 455Wi

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson BrightLink 455Wi and is the answer not in the manual?

Epson BrightLink 455Wi Specifications

Projection IconProjection
white light output2500 lumens
color light output2500 lumens
native resolution1280 x 800 (WXGA)
throw ratio range (16:10)0.37 – 0.50
throw ratio range (4:3)0.44 – 0.59
throw ratio range (16:9)0.37 – 0.50
Lamp Specifications IconLamp Specifications
lamp typeE-TORL 230 W UHE
lamp life (ECO mode)up to 3500 hours
lamp life (normal mode)up to 2500 hours
Power IconPower
power supply voltage100 – 240 V ±10%, 50/60 Hz
power consumption363 W
network on standby power10 W
network off standby power0.3 W
Operating Environment IconOperating Environment
operating temperature41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)35 dB
fan noise (ECO mode)28 dB
Weight and Dimensions IconWeight and Dimensions
dimensions14.5" x 19.0" x 6.1" (W x D x H)
weight with slide plate14.1 lb
weight without slide plate12.9 lb

Related product manuals