EasyManuals Logo
Home>Epson>Projector>BrightLink 455Wi

Epson BrightLink 455Wi User Manual

Epson BrightLink 455Wi
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Connecting to Computers, USB Devices, and Other Equipment 35
Connecting a Document Camera or
Other USB Device
You can connect an interactive whiteboard, document camera, USB
thumb (flash memory) drive, USB hard drive, or multimedia storage
viewer, such as the Epson P-7000. You can use the projector’s
Slideshow function to display JPEG images or a presentation. See
page 80 for details.
Use the USB cable specified for your device.
1. Follow the instructions beginning on page 38 to turn on the
projector.
2. Connect the USB drive or the flat end of the USB cable to the
TypeA (flat) USB port on the projector, as shown.
3. Connect the other end of the cable to your camera or other
device, if necessary.
The indicator light on the projector turns orange and then green
when a USB device is connected.
note
Use a cable less than 10 feet
(3 meters) long and connect
the camera or other device
directly to the projector.
Your projector may not
function correctly if you use
a longer cable or connect to
a USB hub.
If you connect a USB hard
drive, make sure you use the
AC adapter to power the
hard drive. Make sure the
file format is FAT 16/32.
Some USB hard drives may
not be supported.
Indicator light
Connecting the Epson
document camera
note
If the USB light turns red,
the device may not be
supported.

Table of Contents

Other manuals for Epson BrightLink 455Wi

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson BrightLink 455Wi and is the answer not in the manual?

Epson BrightLink 455Wi Specifications

Projection IconProjection
white light output2500 lumens
color light output2500 lumens
native resolution1280 x 800 (WXGA)
throw ratio range (16:10)0.37 – 0.50
throw ratio range (4:3)0.44 – 0.59
throw ratio range (16:9)0.37 – 0.50
Lamp Specifications IconLamp Specifications
lamp typeE-TORL 230 W UHE
lamp life (ECO mode)up to 3500 hours
lamp life (normal mode)up to 2500 hours
Power IconPower
power supply voltage100 – 240 V ±10%, 50/60 Hz
power consumption363 W
network on standby power10 W
network off standby power0.3 W
Operating Environment IconOperating Environment
operating temperature41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)35 dB
fan noise (ECO mode)28 dB
Weight and Dimensions IconWeight and Dimensions
dimensions14.5" x 19.0" x 6.1" (W x D x H)
weight with slide plate14.1 lb
weight without slide plate12.9 lb

Related product manuals