Epson BrightLink 455Wi User Manual

Welcome 19
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive a component video signal from a DVD player or other
video device, you’ll need a component-to-VGA video cable. You
can purchase the ELPKC19 cable from an authorized Epson
reseller. See “Optional Accessories” on page 20.
■ To receive an S-Video signal, you’ll need an S-Video cable. One
may be included with your video equipment, or you can purchase
one from a computer or electronics dealer.
■ To receive an audio signal, you’ll need an RCA-type audio cable
with two male plugs, or a stereo mini-jack audio adapter cable
(with red and white jacks on one end).
■ To connect a Macintosh that includes only a Mini DisplayPort or
Mini-DVI port for video output, you need to obtain an adapter
that allows you to connect to the projector’s VGA video port.
Contact Apple for compatible adapter options.

Epson BrightLink 455Wi Specifications

Projection

white light output	2500 lumens
color light output	2500 lumens
native resolution	1280 x 800 (WXGA)
throw ratio range (16:10)	0.37 – 0.50
throw ratio range (4:3)	0.44 – 0.59
throw ratio range (16:9)	0.37 – 0.50

Lamp Specifications

lamp type	E-TORL 230 W UHE
lamp life (ECO mode)	up to 3500 hours
lamp life (normal mode)	up to 2500 hours

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz
power consumption	363 W
network on standby power	10 W
network off standby power	0.3 W

Operating Environment

operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	35 dB
fan noise (ECO mode)	28 dB

Weight and Dimensions

dimensions	14.5" x 19.0" x 6.1" (W x D x H)
weight with slide plate	14.1 lb
weight without slide plate	12.9 lb