Epson EH-LS9600e User Manual

Configuration Menu
99
•
Each time the CAPS key is selected and the button is pressed, it sets and changes between upper case and lower
case letters.
•
Each time the SYM1/SYM2 key is selected and the button is pressed, it sets and changes the symbol keys for
the section enclosed by the frame.
The following types of character can be entered.
Numbers 0123456789
Letters ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
Symbols ! # $ % & ' ( ) + - . / < = > ? @ ` ^ _ { | } ~
c
•
You cannot use colons (:) for Network menu items.
•
You cannot use spaces for Network menu items.
•
The following four characters cannot be entered using the soft keyboard. Enter these characters using
a Web browser.
s p.81
“ * , ;
Info menu
Function Explanation
Operation Hours
Displays the cumulative operating time.
Source
Displays the source name for the connected equipment currently being projec-
ted.
Input Signal
Displays the content of Input Signal set in the Signal menu according to the
source.
Resolution
Displays the resolution.
Scan Mode
Displays the scan mode.
Refresh Rate
Displays the refresh rate.
3D Format
Displays the 3D format of the signal input during 3D projection (Frame Pack-
ing, Side by Side, or Top and Bottom).
Sync Info
Displays the image signal information.
This information may be needed if service is required.
Deep Color
Displays deep color.
Video Signal
Displays the settings for Video Signal in the Settings menu.
Status
This is information about errors that have occurred on the projector.
This information may be needed if service is required.
Serial Number
Displays the projector's serial number.
Version
Displays the firmware version of the projector.

Epson EH-LS9600e Specifications

General

Brand	Epson
Model	EH-LS9600e
Category	Projector
Language	English