Basic Operations
31
Adjusting the Projected Screen
Displaying the Test Pattern
Immediately after installation, a test pattern is used to adjust the zoom, focus, and the projection position.
Press the
button on the remote control to display the test pattern.
EH-LS10000 EH-LS9600W
You can also select patterns that display R (red), G (green), and B (blue) individually, as well as the pattern for
adjusting the display position. You can use it as a pattern to perform color adjustment when an image signal
is being input.
Press the
button or select Exit to end the test pattern display.
Adjusting the Projector's Tilt
If the projected image is tilted (the left and right sides of the projector are at different heights) when the
projector is setup on a shelf, adjust the front foot so that both sides are level with each other.
Lens Adjustment Function (Focus, Zoom, Lens Shift)
To adjust the focus, zoom, or lens shift, press the button on the remote control or the control panel,
and then select the item you want to adjust.
To Next Page
Loading...
Need help?
General
