Basic Operations
28
c
•
To obtain stable image quality, it is recommended that you leave the projector on for a while before
starting operations.
•
This projector provides a Child Lock function to prevent children from accidentally turning the power
on and a Control Panel Lock function to prevent accidental operations.
s Settings - Lock Setting -
Child Lock/Control Panel Lock p.91
•
This projector comes with a Trigger out 1/Trigger out 2 ports to communicate the current status of the
projector's power (on/off) to external devices. When using this function, set Trigger Out 1/Trigger
Out 2.
s Settings - Operation - Trigger Out 1/Trigger Out 2 p.91
Turning Off
a
Turn off the connected equipment.
c
When Power Off Link is set to On in the HDMI Link menu, turning off HDMI CEC compatible
equipment also turns off the projector.
s
Settings - HDMI Link - Power Off Link p.91
b
Press the button on the remote control or the projector's control panel.
Remote control Control panel
Projection ends, and the lens shutter closes automatically.
c
•
When Standby Confirmation is set to On, a confirmation message is displayed, and the power
turns off when you press the
button again. s Settings - Display - Standby
Confirmation p.91
•
When you turn off the projector, the operation indicator flashes for a while as the projector cools
down. When the operation indicator turns off, cool-down is complete.
c
Disconnect the power cord.
To Next Page
Loading...
Need help?
General
