Configuration Menu
91
Settings menu
Function Menu/Settings Explanation
Keystone
-60 - 60 Performs vertical keystone correction. s p.34
HDMI Link
Device Connections - Displays a list of devices connected from the
HDMI1 or HDMI2 ports, or from WirelessHD
*1
.
HDMI Link On, Off Enables or disables the HDMI Link function.
Power On Link Off, Bidirectional,
Device -> PJ, PJ ->
Device
Sets the link function when the power is turned
on.
Set to power on the projector when content is
played on a connected device (Bidirectional or
Device -> PJ) or to power on a connected device
when the projector is turned on (Bidirectional or
PJ -> Device).
Power Off Link On, Off Sets whether or not to power off connected de-
vices when the projector is turned off.
WirelessHD
1*
Device Connections - Displays a list of available WirelessHD devices
that can be connected.
WirelessHD On, Off Enables or disables the WirelessHD function.
Reception
Displays the reception for the image being pro-
jected.
0% is displayed when no image signal is being
input. Use the Link indicator to check the com-
munication status of the WirelessHD Transmit-
ter.
s p.68
WiHD Mode Full, Dynamic Sets the connection mode of WirelessHD devi-
ces.
Reset Yes, No
Resets WirelessHD settings to their default set-
tings.
Note that even if you reset the projector, the
WirelessHD Transmitter settings are not reset. To
reset the WirelessHD Transmitter, press the Set-
up button on the base.
s p.68
To Next Page
Loading...
Need help?
General
