Replacing the Waste Ink Bottle
Follow the procedure below to replace the parts.
Before starting this procedure, be sure to read the
following:
U “Precautions regarding maintenance” on
page 102
A
Remove the waste ink bottle from the waste ink
bottle holder.
B
Insert the waste ink tube into the mouth of the
new waste ink bottle and place the waste ink
bottle in the holder.
Tightly seal the lid on the used waste ink bottle.
c
Important:
You will need the lid for the waste ink bottle
when disposing of waste ink. Keep the lid in a
safe place; do not throw it out.
C
Press the Z button.
D
Check again to confirm that a new waste ink
bottle has been installed correctly. Press the Z
button to reset the waste ink counter.
c
Important:
Be sure to confirm that the waste ink tube is
inserted in the mouth of the waste ink bottle.
Ink will spill onto the surrounding area if the
tube is not inserted in the bottle.
Disposal of used waste ink bottles U “Disposal”
on page 126
Replacing the Wiper and Wiper
Cleaner
Follow the procedure below to replace the parts.
Before starting this procedure, be sure to read the
following:
U “Precautions regarding maintenance” on
page 102
c
Important:
Leave the used wiper cleaner and wiper that have
been removed on the metal tray until they are
disposed of. If such a part is directly placed on the
printer, it may leave stains that may be difficult to
remove due to the characteristics of the ink.
A
Position the print head for maintenance
purposes.
U “Moving the Print Head” on page 102
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Maintenance
120
To Next Page
Loading...
Need help?
General