Control panel
A
P button (power button)
Turns the power on and off.
B
P light (power light)
The printer's operational status is indicated by a lit or
flashing light.
On : The power is on.
Flashing : The printer is receiving data or
performing head cleaning or other
operations during shut-down.
Off : The power is off.
C M button (media setup button)
Press this button to display the Media Setup menu,
which contains such items as Media Remaining,
Select Media, Customize Settings, and Print Media
List. This button is disabled during printing.
U “The Media Setup Menu” on page 144
D Display
Displays the printer's status, menus, error messages,
and so on. U “Understanding the Display” on
page 21
E Menu button
Press this button to display menus. U “Using the
Control Panel Menu” on page 137
F y button (back button)
Press this button to exit to the previous menu when
options are displayed. U “Menu Operations” on
page 137
G
l/r buttons (left and right arrow buttons)
Use to position the cursor when performing such
tasks as entering a Setting Name or IP Address in
the setup menu.
H
u/d buttons (up and down buttons)
❏ When the media loading lever is in a lowered position
and the d button is pressed, media is fed. If the u
button is pressed, media is rewound. This occurs
regardless of the way the loaded media is rolled. If the
d button is pushed and held in a printable state, at
screens after adjustments or check pattern printing, or
at the media feed screen, media is fed a maximum of
103 cm. Keep the u button pressed to rewind the
media up to 25 cm.
Note that when the u button is used to rewind, the
media will stop when its edge reaches the starting
print position. Rewind can be resumed by releasing
the button and then pressing it again.
❏ When the media loading lever in a raised position, the
button to rewind media depends on how the loaded
media is rolled.
Printable Side Out: Press the u button.
Printable Side In: Press the d button.
Keep the button pressed to rewind the media up to
25 cm.
❏ When the menus are displayed, these buttons can be
used to select menu items and options. U “Menu
Operations” on page 137
I Z button
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Introduction
20