EasyManuals Logo
Home>Epson>Printer>SC-S70600 Series

Epson SC-S70600 Series User Manual

Epson SC-S70600 Series
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
When to perform Component to be replaced
Once every three months Wiper, wiper cleaner
Be sure to replace the wiper and the wiper cleaner at the same time.
These should also be replaced if ink adheres to the absorbent section on the
rear of the wiper cleaner, or when the wiper section is worn or deteriorated.
U “Replacing the Wiper and Wiper Cleaner” on page 120
Flushing pad
This should also be replaced if you are unable to remove lint or dust even after
cleaning, or when ink stains appear on the media.
U “Replacing the Flushing Pad” on page 122
When the plates are deformed or
damaged
Media holding plates
U “Replacing the media holding plates” on page 123
Other maintenance
When to perform Type
When the following message is displayed
on the control panel display (displayed
once every 24 hours)
Remove and shake (MS/)WH ink cartridges.
Shaking ink cartridges (spot color)
U “Shaking” on page 118
Once every three weeks (no message is
displayed)
Shaking ink cartridges (except for spot color)
U “Shaking” on page 118
When checking if nozzles are clogged
When checking which colors are
clogged
Horizontal stripes or tint unevenness
(banding) are appeared
Print a check pattern and check which color nozzles are missing.
U “Checking for clogged nozzles” on page 128
If no nozzles are clogged, see "Horizontal stripes or tint unevenness (banding)" in
"Problem Solver" for other solutions.
U “Horizontal stripes or tint unevenness (banding)” on page 164
When a clog is found after checking for
clogged nozzles
Head Cleaning
U “Head Cleaning” on page 129
If nozzle clogs cannot be cleared even after
head cleaning or cleaning around the print
head and caps
Head Washing
U “Head Washing” on page 130
When tint unevenness (areas of uneven
density) is detected in printing results
Ink Refresh
U “Ink Refresh” on page 132
When the printer will not be used for an
extended period (and switched off)
Pre-storage maintenance (perform Pre-Storage Maint.)
The storage period guideline varies with the model of printer used.
U “Long-term Storage (Pre-storage Maintenance)” on page 132
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Maintenance
99

Table of Contents

Other manuals for Epson SC-S70600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson SC-S70600 Series and is the answer not in the manual?

Epson SC-S70600 Series Specifications

General IconGeneral
BrandEpson
ModelSC-S70600 Series
CategoryPrinter
LanguageEnglish

Related product manuals