Item Parameter Explanation
Light Off
After 1 to 240 hours
Select the timing and intensity level to periodically perform head
cleaning. Periodical cleaning will not be performed while Off is selected. If
a value between 1 and 240 hours is selected, head cleaning will be
performed after the specified number of hours. However, if the specified
time for cleaning is reached during printing, head cleaning is performed
after printing is completed.
The following reset the timer:
❏ When the specified time has been changed; or
❏ When All Nozzles has been performed over the level selected in this
setting.
Medium
Heavy
Power
*3
Cleaning Cycle Off Choose the frequency with which the performs auto head cleaning: never
(Off) or once every 1 to 10 pages. Cleaning Cycle will not be performed
while Off is selected. Select 1 to 10 to perform head cleaning before the
specified number of pages is printed.
1 to 10 pages
Heat Off Timer 15 to 240 minutes You can turn off the heaters automatically when no errors are detected
and no print jobs are in progress. This option is used to choose the interval
before the heaters turn off automatically.
The printer will enter sleep mode when the Heat Off Timer expires. In sleep
mode, the control panel turns off and the internal motors and other
components consume less power. If an additional print drying system
(supplied with the SC-S50600 series; optional with other models) is
installed, it will turn off automatically.
To reactivate the control panel display, press any button in the control
panel except P. The control panel display will however turn off again if no
operations are performed for another 30 seconds under these conditions.
The printer and heaters are only fully reactivated when a print job is
received, the media loading lever is used, or another operation involving
printer hardware is performed.
Head Mode
*1
2 Heads Mode
Use in 2 Heads Mode in most situations.
For example, if there is a clogged nozzle in a single print head and the clog
cannot be cleared after repeated head cleaning, you continue printing
using the unclogged print head. This feature is convenient because
printing can continue during work time, and Head Washing and other
maintenance can be done after work.
Check the check pattern printed in the Nozzle Check, and then select the
unclogged head.
Head1
Head2
Restore Settings Yes
Select Yes to restore all items in the Printer Setup menu to their default
settings.
No
The Maintenance Menu
The Maintenance menu can be accessed directly by pressing the # button.
Setting items and setting values marked with asterisks indicate the following printer models.
*1: SC-S70600 series and SC-S50600 series only supported *2: SC-S50600 series only supported *3: SC-S30600 series
only supported *4: SC-S70600 series only supported
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Using the Control Panel Menu
151
To Next Page
Loading...
Need help?
General