Chapter 2 Description of Functions
97
2.4. Setup
2.4.1. Communication Setup
Refer to "1.4.4 Communication Settings".
2.4.2. Language
Sets the language of the loader. Select the [Setup] → [Language] → [Japanese] or [English],
then exit the loader.
You can select "English" and "Japanese" language.
After you have selected a language, exit the loader and restart the loader.
Switches to the selected language when restart the loader.
* If you do not exit the loader and restart the loader, language is not changed.
To Next Page
Loading...
Need help?
General
