Chapter 2 Description of Functions
43
Chapter 2 Description of Functions
2.1. Main Window
Main Window is the first screen appearing after starting the loader. Simple Menu is displayed on
Main Window. (The following example omits the display.)
Main Menu
You can select all the Loader functions.
Tool Bar
You can select primary Loader functions.
Status Bar
This shows the outline of the function to be selected.
It also displays the status of connection with the inverter in
the upper right box.
Main Menu
It contains six selectable functions: [File], [Menu], [Setup], [View], [Window] and [Help].
Tool Bar
This allows you to select common functions quickly and easily. For example, to open a file
which contains the function code data, you should normally click [File] on Main Menu and then
click [Open] under [File] menu; accordingly two actions are required. Using Tool Bar, you can
open the file simply by clicking
icon.
Status Bar
Place the mouse pointer on the function icon or menu being displayed. Then, the statement
appears, describing the meaning of the function or menu.
When “Perform Connection Check” is selected in Communication Setting (see “1.4.3
Communication Settings and Connection Settings of Loader”), the status of connection with the
inverter is displayed in the upper right box. (In the above example, “Unknown” is displayed.)
To Next Page
Loading...
Need help?
General
