3 Copy
120
Copy
3
• Select a tray other than [Auto Select] in [Paper Supply] on the [Copy] screen. If [Auto Select]
is selected in [Paper Supply], a tray specified in [Auto Paper Off] is automatically selected.
Change the setting as necessary. For information on [Auto Paper Off], refer to "5 Tools" >
"Copy Service Settings" > "Copy Control" > "Auto Paper Off" in the Administrator Guide.
1 Select [Pages per Side].
2 Select any option.
îš„Off
Disables this feature.
îš„2 Pages
Copies two document pages onto one side of a single sheet of paper.
îš„4 Pages
Copies four document pages onto one side of a single sheet of paper.
îš„8 Pages
Copies eight document pages onto one side of a single sheet of paper.
îš„Reading Order
Allows you to select how to layout images on a page.
îš„Original Orientation
Allows you to specify the orientation of the document so that the machine can identify
the top of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.
z
Upright Images
Select this option when placing the top edge of the document against the top side of
the document glass or document feeder.
z
Sideways Images
Select this option when placing the top edge of the document against the left side of
the document glass or document feeder.
Poster (Making Enlarged Copies Spread over Multiple Sheets)
An enlarged copy of a document can be made spread over multiple sheets.
To Next Page
Loading...
Need help?
General
