Fax/Internet Fax
179
Fax
4
1 Press a one touch button. Confirm that the
recipient (fax number) specified with the one
touch button is displayed on the touch
screen.
Important • The one touch buttons have a sensor to
detect which page of one touch buttons (1
- 18, 19 - 36, or 37 - 54) is currently
opened. Before pressing a one touch
button, turn over the one touch panel
completely, and take off your hand from
the panel. Do not press the button while
you are turning over the panel.
• Do not place any objects near the one
touch buttons, nor spill any liquid over
them.
Note • To specify multiple recipients, press the
one touch buttons continuously.
• Turn the one touch panel over to press the one touch buttons 19 and above.
Specifying a Destination Using the Keyboard Screen
You can specify recipients using the keyboard screen.
Important • When transmission to a certain recipient is prohibited in the System Administration mode,
the [New Recipients] button cannot be used.
1 Select [New Recipients].
2 Specify a recipient with up to 128 characters
using the keyboard displayed on the touch
screen.
Note • When the Server Fax service is used, a destination must be less than 50 characters long.
The available characters are as follows:
0 to 9 Numeric characters
- Pause
# A starting character for a group number
\ A delimiter for private data. Using this character before and after private data
hides the destination string.
S A character for password verification
: DTMF signal
= A character to wait for dial tones
+ Available, but ignored
(Space) Available, but ignored
For more information, refer to the documentation provided with the Server Fax Kit.
One touch button
To Next Page
Loading...
Need help?
General
