EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuCentre-IV C2260

Fuji Xerox DocuCentre-IV C2260 User Manual

Fuji Xerox DocuCentre-IV C2260
401 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #173 background imageLoading...
Page #173 background image
Simple Fax
171
Fax
4
Specifying a Destination Using a One Touch Button
You can use the one touch buttons to specify recipients. One touch buttons correspond
to the address numbers from 0001 to 0052, or 0001 to 0045. For example, when the
number you want to dial is registered to the address number 0001, press one touch
button <1>.
For information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book
Entry" in the Administrator Guide.
Note • There are two ways in which address numbers and stored programs are assigned to the one
touch buttons. Select either of the following. By default, [Type 1] is selected.
• [Type 1]
The buttons 1 to 52 are used for address numbers and they correspond to the registered
address numbers 0001 to 0052, while the buttons 53 and 54 are used for stored programs
and they correspond to the registered stored programs 1 and 2.
• [Type 2]
The buttons 1 to 45 are used for address numbers and they correspond to the registered
address numbers 0001 to 0045, while the buttons 46 to 54 are used for stored programs
and they correspond to the registered stored programs 1 to 9.
1 Press a one touch button. Confirm that the
recipient (fax number) specified with the one
touch button is displayed on the touch
screen.
Important • The one touch buttons have a sensor to detect which page of one touch buttons (1 - 18, 19 -
36, or 37 - 54) is currently opened. Before pressing a one touch button, turn over the one
touch panel completely, and take your hand off from the panel. Do not press the button while
you are turning over the panel.
• Do not place any objects near the one touch buttons or spill any liquid over them.
Note • Turn the one touch panel over to press the one touch buttons 19 and above.
• If you have entered an incorrect value, press the <C (Clear)> button and enter the correct
value.
2 Press the <Start> button.
Resolution (Specifying the Scanning Resolution)
You can set the resolution for the documents to be scanned.
One touch buttons
123
456
789
0#
C
<Start> button

Table of Contents

Other manuals for Fuji Xerox DocuCentre-IV C2260

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-IV C2260 and is the answer not in the manual?

Fuji Xerox DocuCentre-IV C2260 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-IV C2260
CategoryAll in One Printer
LanguageEnglish

Related product manuals