Setup
285
Tools
5
• You can use wildcards for specifying the numbers in the last one or two digits as shown in the
following example:
- 001*:Specifies the 10 addresses with address numbers 010 to 019.
- ****:Specifies all address numbers.
1 Select [Create Fax Group Recipients].
2 Select a group number to register.
Note • Select [ ] to display the previous screen or
[ ] to display the next screen.
3 Select [Group Name] and enter a group name
to register, and then select [Save].
4 Enter a speed dial number (four digits) to
register with the numeric keypad, and then
select [Add to this Group].
5 Repeat step 4 to register the address numbers.
6 Select [Save].
îš„ Delete this group
Deletes all information registered on a group.
îš„ Delete from this group
Deletes a registered address. Select the speed dial or enter the speed dial number to delete
with the numeric keypad, and then select [Delete from this group].
Add Fax Comment
You can register comments to be printed on cover sheets. A maximum of 50 comments can
be registered, each of which can be up to 36 single-byte characters.
For information about how to enter characters, refer to "Entering Text" (P.36).
Paper Tray Attributes
Set a paper size and a paper type load in each tray.
Refer to "Paper Tray Attributes" (P.152).
To Next Page
Loading...
Need help?
General
