Paper Jams
577
Problem Solving
15
Paper Jams in Tray 4 (When Tandem Tray Module is Installed)
The following describes how to clear paper jams occurring in Tray 4 when the Tandem Tray
Module is installed.
1 Pull out Tray 4.
Important •If you pull out a paper tray without checking
the paper jam location, the jammed paper
may be torn and the pieces may remain
inside the machine. This may cause machine
malfunctions; therefore, always check where
the paper jam occurred first.
2 Remove the jammed paper.
Note • If the paper is torn, make sure no piece of
paper remains inside the machine.
3 If paper is jammed in the paper feed section,
open the inner cover and gently remove the
paper.
4
Push the tray in gently until it stops.
Paper Jams in Tray 5
The following describes how to clear paper jams occurring in Tray 5.
1 Check the back of Tray 5 (around the paper
feed entrance) and remove the jammed paper.
Important •When two or more sheets of paper are
loaded, remove all of the sheets from the
tray.
Note • If the paper is torn, make sure no piece of
paper remains inside the machine.
2 When two or more sheets of paper were loaded, jog the paper you removed making sure
that all four corners are neatly aligned.
To Next Page
Loading...
Need help?
General
