EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuCentre-IV C5575

Fuji Xerox DocuCentre-IV C5575 Administration Guide

Fuji Xerox DocuCentre-IV C5575
731 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #470 background imageLoading...
Page #470 background image
15 Problem Solving
470
Problem Solving
15
Unable to Send E-mail
If you cannot send a scanned document using the E-mail feature, identify the symptom in
the following table to perform the remedy.
The Image is not What was Expected
If the image is not what was expected, identify the symptom in the following table to
perform the remedy.
Symptom Cause Remedy
A Transmission
Report - Job
Undelivered is
output.
Unable to transmit because
of an error.
Check the Transmission Results in the
Transmission Report - Job Undelivered. If the
error code is displayed, refer to "Error Code"
(P.488).
Unable to send e-
mail.
The mail address is incorrect. Enter the correct mail address.
The data size exceeded the
maximum e-mail size.
Change the maximum e-mail size, or lower
the resolution.
Refer to "Maximum Total Data Size" (P.252), or "5 Scan"
> "Layout Adjustment" in the User Guide.
Symptom Cause Remedy
The image is dirty. The document glass or the
document cover is soiled.
Clean the document glass or the document
cover.
Refer to "Cleaning Document Cover and Document
Glass (for Duplex Automatic Document Feeder B1-C)"
(P.89).
The document is a
transparent type such as a
transparency film.
If the document is transparent, dirt on the
document cover may be copied on the image.
Place a white sheet of paper on top of the
document when scanning.
The document is colored,
rough, or a blueprint.
Adjust the copy density or image quality
when scanning.
The document is glossy
printing paper.
Glossy printing paper easily sticks to the
document glass, and shadows are sometimes
scanned, soiling the image. Place a
transparency film under the document when
scanning.
The image is too
dark, or too light.
The scan density is set to
[Darken] or [Lighten].
Adjust the scan density.
Refer to "5 Scan" > "Advanced Settings" in the User
Guide.
The setting for [Original Type]
is inappropriate for the
document.
Select an image quality appropriate for the
document.
Refer to "5 Scan" > "Advanced Settings" in the User
Guide.
Part of the image
is missing.
The document is pasted or
folded.
The pasted or folded section may not be
laying flat on the document glass. Place a
stack of white sheets on top of the document
to flatten the document against the
document glass.

Table of Contents

Other manuals for Fuji Xerox DocuCentre-IV C5575

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre-IV C5575 and is the answer not in the manual?

Fuji Xerox DocuCentre-IV C5575 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre-IV C5575
CategoryAll in One Printer
LanguageEnglish

Related product manuals