16 Appendix
704
Appendix
16
îš„ Private Charge Print
User ID for Private Charge Print must be specified not more than 24 bytes (24 characters).
If the User ID set to the print driver exceeds 24 bytes, the job will not be stored. Also, when
the User ID with more than 24 bytes is used for authentication, the user cannot instruct
Private Charge Print.
îš„ Control of Forcible Printing Features on ContentsBridge
z
Does not support the protection code.
z
When forcible printing features are enabled on the machine, the settings on
ContentsBridge are ignored.
Notes and Restrictions on the Authentication and Accounting Features
îš„ Login to Remote Accounts (ApeosPort Series Models Only)
z
Only the services that can be instructed from the touch screen (Copy, Scan, Fax, Internet
Fax, Charge Print, and Private Charge Print) are restricted by the Login to Remote
Accounts feature. You cannot restrict the output color* or the number of pages.
* : *If ApeosWare Authentication Agent/ApeosWare Authentication Management (purchase separately) is used as an
authentication system, you can restrict the output color.
z
In this feature, neither Print nor Direct Fax can be restricted. To restrict print operations,
use the Charge Print or Private Charge Print feature. If there is a security problem, prohibit
Direct Fax. To prohibit Direct Fax, contact our Customer Support Center.
z
When you change Login Type to or from [Login to Remote Accounts], user information,
private folders, and Personal Sheets registered on the machine will be deleted.
z
ApeosWare Authentication Management and ApeosWare Authentication Agent do not
support the feature to automatically obtain the certificate of the authenticated users
from a remote server.
îš„ Remote Authentication and ApeosWare Authentication Agent/ApeosWare
Authentication Management (ApeosPort Series Models Only)
z
The remote authentication server that ApeosWare Authentication Agent/ApeosWare
Authentication Management can use is Active Directory only.
z
Color Access is available but the limit for the maximum number of pages is not available.
îš„ Remote Authentication using the Smart Card
z
Remote Authentication can be performed in an environment where ApeosWare
Authentication Agent/ApeosWare Authentication Management, Active Directory, or the
combination of ApeosWare Authentication Agent/ApeosWare Authentication
Management and Active Directory is used.
z
Change the default realm name only when you want to use a different realm name.
z
When IC Card Reader is used for remote authentication, the combined use of the smart
card and a user ID and a passcode entries from the control panel is available for
authentication. When local authentication is used, however, the combination is not
available.
Notes and Restrictions for Using SMB
This section describes notes and restrictions to observe when using SMB.
To Next Page
Loading...
Need help?
General
