15 Problem Solving
580
Problem Solving
15
Paper Jams in Duplex Module B
The following describes how to clear paper jams occurring in the duplex module B if the
machine supports the 2 Sided Printing feature.
1 Open Tray 5, and then while lifting up the
release lever gently open the duplex module
cover.
2 Remove the jammed paper.
Note • If the paper is torn, make sure no piece of
paper remains inside the machine.
3 Close the duplex unit cover, and then close Tray
5.
Paper Jams in Finisher-A1
The following describes how to clear paper jams occurring in the Finisher-A1 (optional).
The following shows the reference section for the procedures to clear a paper jam in each
location.
Paper Jams under the Finisher Top Cover
1 Open the finisher top cover (1), turn the knob
(2), and then remove the jammed paper.
Note • If the paper is torn, make sure no piece of
paper remains inside the machine.
2 Close the finisher top cover.
To Next Page
Loading...
Need help?
General
