Using the Operator Panel Menus 113
• PaperSzeMismatch
Purpose:
To specify whether to use paper of a different size when the paper that is loaded in the standard 150 sheet tray does
not match the paper size settings for the current job.
Values:
• RAM Disk
Purpose:
To allocate memory to the RAM disk file system for the Secure Print features. The change becomes effective after
the printer is turned off and then on again.
Values:
Maintenance
Use the Maintenance menu for maintenance work including initialization of the NVM (non-volatile memory).
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
• F/W Version
Purpose:
To display the version of the controller.
• Adjust Paper Type
Purpose:
To adjust the paper type.
Values:
On(except A4/Ltr)* Shows the alert message except for the time A4 size paper is loaded in the tray
and Letter size is set for the current job and for the other way around.
Off No tray size substitute accepted.
On Shows the alert message when the paper size loaded in the tray is different from
the paper size set for the current job.
Off* Does not allocate memory to the RAM disk file system. Secure Print jobs will abort
and be recorded to the job log.
On Sets the allocation of memory to the RAM disk file system.
Plain Heavyweight*
Lightweight
Labels Heavyweight*
Lightweight
To Next Page
Loading...
Need help?
General
