Printing Basics 91
Selecting Options for an Individual Job (Windows)
If you want to use special printing options for a particular job, change the driver settings before sending the job to the
printer. For example, if you want to use Photo print-quality mode for a particular graphic, select this setting in the
driver before printing that job.
1 With the desired document or graphic open in your application, access the Print dialog box.
2 Select your printer and click Preferences to open the print driver.
3 Make selections on the driver tabs.
NOTE:
• When using the PCL or PostScript 3 Compatible driver, you can save current printing options with a distinctive name and
apply them to other print jobs. Select either the Paper/Output, Graphics, Layout, Watermark/Forms, or Advanced
tab, and then click Save under Favorites on the Paper/Output tab. Click Help for more information.
4 Click OK to save your selections.
5 Print the job.
See the following table for specific printing options:
The table shown below uses the PCL driver as an example.
Printing Options for Windows
Driver Tab Printing Options
Paper/Output tab • Job Type
– Setup
• Favorites
– Save
– Edit
• Duplex
• Output Color
• Copies
• Collated
• Paper Summary
• Paper Size
• Paper Type
• Feed Orientation
• Print as Bitmap
• Envelope/Paper Setup Navigator
• Printer Status
• Restore Defaults
Graphics tab • Output Color
• Image Adjustment Mode
• Image Types
• Screen
• Toner Saving Mode
• Gray Guaranteed
• Image Settings
• Color Balance
• Profile Settings
• Restore Defaults
To Next Page
Loading...
Need help?
General
