Fuji Xerox DocuPrint CP225 w User Manual

Troubleshooting 151
 Protrudent/Bumpy Paper
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji Xerox local
representative office or an authorized dealer.
Problem Action
Printed surface got
protrudent/bumpy.
Clean up the fusing unit.
1 Load one sheet of paper in the standard 150 sheet tray, and then print a solid
image all over the paper.
2 Load the printed sheet with the printed side facing down, and then print a blank
sheet of paper.

Fuji Xerox DocuPrint CP225 w Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP225 w
Category	Printer
Language	English