152 Troubleshooting
Adjusting Color Registration
This section describes how to adjust the color registration when you first install the printer or after moving it to a new
location.
Performing Auto Correct
Auto Correct allows you to correct the color registration automatically.
Using the Operator Panel
1 Press the (Menu) button.
2 Select Admin Menu, and then press the button.
3 Select Maintenance, and then press the button.
4 Select Adjust ColorRegi, and then press the button.
5 Select Auto Adjust, and then press the button.
6 Confirm that Are you sure? appears.
7 Select Yes, and then press the button.
Auto Correct is performed.
Using the Printer Setting Utility (Windows Only)
The following procedure uses Windows 7 as an example.
1 Click Start All Programs Fuji Xerox Fuji Xerox Printer Software for Asia-Pacific your printer
Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step when multiple print drivers are installed on your computer. In this
case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility opens.
2 Click the Printer Maintenance tab.
3 Select Registration Adjustment from the list at the left side of the page.
The Registration Adjustment page is displayed.
4 Deselect the check box next to On.
5 Click Start next to Auto Correct.
The color registration is corrected automatically.
To Next Page
Loading...
Need help?
General
