Printing Basics 95
• Setting Up the Printer
1 Press the (Menu) button.
2 Select Admin Menu, and then press the button.
3 Select Network, and then press the button.
4 Select Wi-Fi Direct Setup, and then press the button.
5 Select Wi-Fi Direct, and then press the button.
6 Select Enable, and then press the button.
When you use a Wi-Fi Direct certified mobile device (including the device with the Wi-Fi Direct PIN function),
proceed to step 9.
When you use a mobile device that is not Wi-Fi Direct certified, or mobile device with WPS-PBC (Wi-Fi
Protected Setup™-Push Button Configuration), WPS-PIN (Wi-Fi Protected Setup-Personal Identification
Number), proceed to step 7.
7 Select Group Role, and then press the button.
8 Select Group Owner, and then press the button.
For a mobile device with WPS-PBC
a Select WPS Setup, and then press the button.
b Select PushButtonControl, and then press the button.
The printer is ready to use the WPS-PBC connection.
For a mobile device with WPS-PIN
a Select WPS Setup, and then press the button.
b Select PIN Code, and then press the button.
The printer is ready to use the WPS-PIN connection.
9 Select Connection Status, and then press the button.
10 Confirm no device is connected with the Wi-Fi Direct connection.
NOTE:
• When other device is connected (the mobile device name is displayed on Connection Status), you cannot use the
Wi-Fi Direct connection. Disconnect the other device from the Wi-Fi Direct network. For details, see "Disconnecting Wi-Fi
Direct Network" on page 97.
The printer is ready to use the Wi-Fi Direct connection.
• Connecting a Wi-Fi Direct Certified Mobile Device
The following is a typical procedure for connecting a mobile device to the printer using Wi-Fi Direct. The procedure
varies depending on the mobile device you are using. Refer to the manual provided with your mobile device.
1 From the mobile device, start the procedure to connect using Wi-Fi Direct.
2 Accept the invitation for Wi-Fi Direct connection displayed on the LCD panel of the printer.
NOTE:
• If you want to change the printer's group role of the Wi-Fi Direct network, select Group Role under the Wi-Fi Direct
Setup menu.
To Next Page
Loading...
Need help?
General
