Using the Operator Panel Menus 150
• Font Pitch
Purpose:
To specify the font pitch for scalable mono spaced fonts, within the range of 6.00 to 24.00. The default
is 10.00.
Font pitch refers to the number of fixed-space characters in a horizontal inch of type. For
nonscheduled mono spaced fonts, the pitch is displayed, but cannot be changed.
NOTE:
• The Font Pitch menu is only displayed for fixed or mono spaced fonts.
• Form Line
Purpose:
To set the number of lines in a page.
Values:
The printer sets the amount of space between each line (vertical line spacing) based on the Form
Line and Orientation menu items. Select the correct Form Line and Orientation before
changing Form Line.
• Quantity
Purpose:
To set the default print quantity, within the range of 1 to 999. The default is 1. (Set the number of
copies required for a specific job from the print driver. Values selected from the print driver always
override values selected from the operator panel.)
• Image Enhance
Purpose:
To specify whether to enable the Image Enhance feature, which makes the boundary line between
black and white smoother to decrease jagged edges and enhance the visual appearance.
Values:
• Hex Dump
Purpose:
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer
is printed in hexadecimal and character representation. Control codes are not executed.
Values:
64
*1
(mm series)/60
*1
(inch series) Sets the value in increments of 1.
5–128
*1
Denotes country-specific factory default values.
Off Disables the Image Enhance feature.
On
*
Enables the Image Enhance feature.
Disable
*
Disables the Hex Dump feature.
Enable Enables the Hex Dump feature.
To Next Page
Loading...
Need help?
General
