Using the Operator Panel Menus 166
• Clean Developer
Purpose:
To stir the toner in a new toner cartridge.
• Toner Refresh
Purpose:
To clean the toner in each toner cartridge.
Values:
• Drum Refresh
Purpose:
To clean the surface of the drum cartridge.
• Initialize NVM
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all
the menu parameters are reset to their default values.
See also:
• "Resetting to Factory Defaults" on page 177.
• Init Print Meter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to
zero.
• Reset Fuser
Purpose:
To initialize the Machine Control Unit life counter.
Yellow Crtrdg Cleans the toner in the yellow toner cartridge.
Magenta Crtrdg Cleans the toner in the magenta toner cartridge.
Cyan Crtrdg Cleans the toner in the cyan toner cartridge.
Black Crtrdg Cleans the toner in the black toner cartridge.
To Next Page
Loading...
Need help?
General
