Fuji Xerox DocuPrint CP305 d User Manual

157 Using the Operator Panel Menus
• Adobe Protocol
Purpose:
To set the PostScript communications protocol.
Values:
•
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
•Port Status
Purpose:
To specify whether to enable the USB port. The change becomes effective after the printer is turned
off and then on again.
Values:
• Adobe Protocol
Purpose:
To set the PostScript communications protocol.
Values:
System Settings
Use System Settings to configure a variety of printer features.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Auto* Sets the PostScript communications protocol automatically.
Standard Sets the PostScript communications protocol to Standard.
BCP Sets the PostScript communications protocol to BCP.
TBCP Sets the PostScript communications protocol to TBCP.
Binary Sets the PostScript communications protocol to Binary.
Disable Disables the USB interface.
Enable
*
Enables the USB interface.
Auto Sets the PostScript communications protocol automatically.
Standard Sets the PostScript communications protocol to Standard.
BCP Sets the PostScript communications protocol to BCP.
TBCP* Sets the PostScript communications protocol to TBCP.
Binary Sets the PostScript communications protocol to Binary.

Fuji Xerox DocuPrint CP305 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP305 d
Category	Printer
Language	English