Fuji Xerox DocuPrint CP305 d User Manual

Troubleshooting 206
 Toner Smears or Print Comes Off
Problem Action
Toner smears or print comes off. The print media surface may be uneven. Try changing the Paper
Type setting in the print driver. For example, change the plain paper
to heavy using a PCL 6 driver.
1 On the Paper / Output tab, change the Paper Type setting.
If the problem persists, verify that the correct print media is being
used.
Verify that the correct print media is being used.
See also:
• "Usable Print Media" on page 100
If not, use the print media recommended for the printer.
If the problem persists, replace the drum cartridge if you have a spare
cartridge.
Replace the drum cartridge if you have a spare cartridge.
1 Replace the drum cartridge.
See also:
• "Replacing the Drum Cartridge" on page 257
• "Installing the Drum Cartridge" on page 260
2 After you replace the drum cartridge, test print your document
again.
If the problem persists, contact the Fuji Xerox local representative
office or an authorised dealer.

Fuji Xerox DocuPrint CP305 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP305 d
Category	Printer
Language	English