223 Troubleshooting
Damage on the Leading Edge of Paper
Problem Action
The output is damaged on its
leading edge.
When using the SSF, reverse the paper and then try again.
If the problem persists, change the paper with another one and then
try again.
When using the standard 250-sheet tray or optional 250-sheet feeder,
change the paper and then try again.
If the problem persists, contact the Fuji Xerox local representative
office or an authorised dealer.
Change the paper with another one and then try again.
If the problem persists, use the standard 250-sheet tray or optional
250-sheet feeder in place of the SSF.
Use the standard 250-sheet tray or optional 250-sheet feeder in place
of the SSF.
If the problem persists, contact the Fuji Xerox local representative
office or an authorised dealer.
To Next Page
Loading...
Need help?
General
