Basic Operation 40
NOTE:
• Ensure that the memory module is firmly fixed in the slot and does not move easily.
5 Close the control board cover, and turn the screw clockwise.
6 Turn on the printer.
7 Print the Printer Settings page to confirm that the newly installed memory module is detected by
the printer.
a Press the Menu button.
b Select Report/List, and then press the button.
c Select Printer Settings, and then press the button.
The Printer Settings page is printed.
8 Confirm the amount of Memory Capacity listed under General in the Printer Settings page.
If the memory capacity has not increased, turn off the printer, unplug the power cord, and
re-install the memory module.
9 If you installed the optional memory module after installing the print driver, update your driver by
following the instructions for the operating system you are using. If the printer is on a network,
update the driver for each client.
To Next Page
Loading...
Need help?
General
