GE L30 User Manual

GE Multilin L30 Line Current Differential System 5-85
5 SETTINGS 5.2 PRODUCT SETUP
5
Figure 5–16: USER-PROGRAMMABLE PUSHBUTTON LOGIC (Sheet 2 of 2)
5.2.14 FLEX STATE PARAMETERS
PATH: SETTINGS  PRODUCT SETUP  FLEX STATE PARAMETERS
 FLEX STATE
 PARAMETERS
PARAMETER 1:
Off
Range: FlexLogic operand
MESSAGE
PARAMETER 2:
Off
Range: FlexLogic operand
MESSAGE
PARAMETER 3:
Off
Range: FlexLogic operand
↓
MESSAGE
PARAMETER 256:
Off
Range: FlexLogic operand
Pushbutton 1
LED
Instantaneous
reset *
OR
1. If pushbutton 1 LED control is set to off.
2. If pushbutton 1 LED control is not set to off.
PUSHBUTTON 1 LED LOGIC
OR
AND
AND
SETTING
= Disabled
= High Priority
PUSHBTN 1 MESSAGE
= Normal
FLEXLOGIC OPERAND
PUSHBUTTON 1 ON
Pushbutton 1
LED
SETTING
= any FlexLogic operand
PUSHBTN 1 LED CTL
AND
SETTING
FLASH MESSAGE TIME
T
RST
0
PUSHBUTTON ON
LATCHED
LATCHED/SELF-RESET
AND
From user-programmable
pushbuttons logic sheet 1
FLEXLOGIC OPERAND
PUSHBUTTON 1 ON
FLEXLOGIC OPERAND
PUSHBUTTON 1 OFF
SETTING
T
RST
0
Instantaneous
reset *
OFF MESSAGE
ENGAGE MESSAGE
SETTINGS
= XXXXXXXXXX
PUSHBTN ID TEXT
= XXXXXXXXXX
PUSHBTN OFF TEXT
The message is temporarily removed if
any keypad button is pressed. Ten
seconds of keypad inactivity restores
the message.
ON MESSAGE
ENGAGE MESSAGE
SETTINGS
= XXXXXXXXXX
PUSHBTN ID TEXT
= XXXXXXXXXX
PUSHBTN ON TEXT
Instantaneous reset is executed if any
front panel button is pressed or any new
target or message becomes active.
842024A3.CDR
OR
FLEXLOGIC OPERAND
PUSHBUTTON 1 ON
PUSHBUTTON 2 ON
PUSHBUTTON 3 ON
PUSHBUTTON 16 ON
FLEXLOGIC OPERAND
ANY PB ON
The enhanced front panel has 16 operands;
the standard front panel has 12
FLASH MESSAGE TIME

GE L30 Specifications

General

Brand	GE
Model	L30
Category	Relays
Language	English