GE LOGIQ V1 User Manual

Other Controls
LOGIQ V2/LOGIQ V1 – User Guide 2-15
Direction 5610736-100 Rev. 9
Body Patterns
Press the Body Pattern key on the control panel to enter into
body pattern mode.
Select the desired body pattern and the selected body pattern is
displayed on the monitor.
• Select the Move Pattern control to reposition the body
pattern with the Trackball and Set controls.
NOTE: Body Pattern Position is updated when the display format is
changed.
NOTE: Body Pattern Position is reset to factory default when patient
is changed (e.g. End Exam).
• A probe mark is associated with the body patterns and
illustrates the probe position on the body pattern. This
marker can be placed with the Trackball and rotated by
adjusting the Probe Rotate menu.
• The probe mark type is selectable by adjusting the Probe
Type menu.
• To select the active side in dual B-Mode, adjusting Active
Side menu.
• To clear the body pattern, press the Body Pattern control to
activate body patterns and then press the Clear key.
• Press Set key on the control panel or Body Pattern key on
the control panel to exit without erasing the body pattern.

GE LOGIQ V1 Specifications

General

Brand	GE
Model	LOGIQ V1
Category	Medical Equipment
Language	English