After the Exam is Over
3-36 LOGIQ V2/LOGIQ V1 – User Guide
Direction 5610736-100
Rev. 9
System Care and Maintenance
Overview
The user must ensure that safety inspections are performed at
least every 12 months according to the requirements of the
patient safety standard IEC 60601-1. Refer to the Service
manual, Chapter 10.
Refer to Section 10 of the LOGIQ V2/LOGIQ V1 Service Manual
for any additional maintenance guidance.
Only trained persons are allowed to perform the safety
inspections mentioned above.
Technical descriptions are available on request.
To ensure that the unit constantly operates at maximum
efficiency we recommend that the following procedures be
observed as part of the customer’s internal routine maintenance
program.
Contact the local Service Representative for parts or periodic
maintenance inspections.
Standard maintenance must be performed by authorized
service personnel for the lifetime of the product (7 years).
Do not perform system care and maintenance in the patient
environment.
To Next Page
Loading...
Need help?
General
