2 ADV200 • Quick start up guide
Information about this manual
The ADV200 Quick start guide is a handy-sized manual for mechanical installation, electrical
connection and fast start-up.
The manual explaining the functions and a description of the parameters and the manuals of
the expansions and eld bus can be found on the CD provided with the drive.
Software version
This manual is updated according the software version V 7.X.16.
The identication number of the software version is indicated on the identication plate of the
drive or can be checked with the Firmware ver.rel - PAR 490 parameter, menu 2.5.
The Softscope3 (Gefran’s Digital Oscilloscope) Tool can be used with version V.7.X.14 and
more recent of the rmware. For detailed information on use, please refer to the 1S9SF3EN
manual.
General information
Note ! In industry, the terms “Inverter”, “Regulator” and “Drive” are sometimes interchanged. In this document, the
term “Drive” will be used
.
Before using the product, read the safety instruction section carefully. Keep the manual in a
safe place and available to engineering and installation personnel during the product function-
ing period.
Gefran Drives and Motion S.r.l. has the right to modify products, data and dimensions without
notice. The data can only be used for the product description and they can not be understood
as legally stated properties.
Thank you for choosing this Gefran product.
We will be glad to receive any possible information which could help us improving this manual.
The e-mail address is the following: techdoc@gefran.com.
All rights reserved
To Next Page
Loading...
Need help?
General
