188 ADV200 • Quick start up guide
INT-SLAVE cards
MONITOR LED
D1
LEDS Colour FUNCTION
Normal
functioning
MONITOR
D1 Yellow
It flashes to indicate the presence of the temperature signal of the slave drive that
is connected
Flashes
A 1.6 Safety STO Interface
A 1.6.1 ADV-...-MS-SI models (INT-P-ADV card, revision “F” and lower)
The EXP- SFTy card is integrated as standard in the master inverter of 400 kW to 1 MW
parallel versions.
If the safety function is not required, the safety enable command must still be sent to terminal 1 on
the EXP-SFTy-ADV card to enable the drive.
For instructions on connecting and commissioning the safety card with the SIL2 or SIL3 safety level
function, please see chapter 7 “Application Examples” in the Safety manual (code 1S5F94) in the CD
supplied with the drive or which you can download from www.gefran.com.
A 1.6.2 ADV-...-MS-SI models (INT-P-ADV card, from revision “L”)
The ADV200 size 7 (and parallel unit ADV-...-MS) does not have the EXP-SFTy-
ADV card, it is integrated and maintains all of the functions in the INT-P-ADV
MASTER card (from revision “L”).
In the reference manual for “Description of functions and parameters list” (ADV200
ASY FP, code 1S9H51 or ADV200 SYN FP, code 1S9H66) safety function man-
agement parameters maintain the reference to the “EXP-SFTy-ADV card”.
Caution
To Next Page
Loading...
Need help?
General
