To Next Page

To Previous Page

28 ADV200 • Quick start up guide

5.1.2 Connection of shielding

• Sizes 1...5

Fasten the metallic support (A), for shielding of the power section, in the two hous-

ings (B) and secure with the two screws + washer provided (C).

Fasten the shield of the cables to the omega sections (D).

• Sizes ≥ 6

For these sizes the metal support (A) is not provided. Cable shielding must be

provided by the installer.

Connection of shielding inside a cabinet

The motor connection cable must be shielded inside a cabinet. The gure shows

two examples.

gefran ADV200 Series User Manual

Questions and Answers: