HIKVISION DS-K1TA70 Series User Manual

Figure 8-16 Temperature Measurement Sengs
2.
Enable Temperature Measurement.
3.
Congure the temperature measurement parameters.
Enable Temperature Detecon
When enabling the funcon, the device will authencate the permissions and at the same
me take the temperature. When disabling the device, the device will authencate the
permissions only.
Over-Temperature Alarm Threshold (Max./Min.)
Edit the threshold according to actual situaon. If the detected temperature is higher or
lower than the
congured parameters, an alarm will be triggered. By default, the value is
37.3°.
Temperature Compensaon
If the measured temperature is higher/lower than the actual object's temperature, you can
set the
compensaon temperature here. Available range: -99 °C to 99 °C.
Door Not Open When Temperature is Abnormal
When enabling the funcon, the door will not open when the detected temperature is higher
or lower than the congured temperature threshold. By default, the funcon is enabled.
Temperature Measurement Only
DS-K1TA70 Series Face Recognion Terminal User Manual
102

HIKVISION DS-K1TA70 Series Specifications

General

Brand	HIKVISION
Model	DS-K1TA70 Series
Category	Touch terminals
Language	English