Chapter 1 Overview
1.1 Overview
Face recognion terminal is a kind of access control device for face recognion, which is mainly
applied in security access control systems, such as logisc centers, airports, university campuses,
alarm centrals, dwellings, etc.
Note
This device is NOT for medical use.
1.2 Features
●
Supports Vanadium Oxide uncooled sensor to measure target's temperature
●
Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 °C,
deviaon:
± 0.5 °C
●
Recognion distance: 0.3 to 1.8 m
●
Fast temperature measurement mode: Detects face and takes temperature without identy
authencaon.
●
Mulple authencaon modes are available: card and temperature, face and temperature, card
and face and temperature, etc.
●
Face mask wearing alert
If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the
same
me, the authencaon or aendance is valid.
●
Forced mask wearing alert
If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the
same
me, the authencaon or aendance will be failed.
●
Displays temperature measurement results on the
authencaon page
●
Triggers voice prompt when detecng abnormal temperature
●
Congurable door status (open/close) when detecng abnormal temperature
●
Transmits online and oine temperature informaon to the client soware via TCP/IP
communicaon and saves the data on the client soware
●
Face recognion duraon < 0.2 s/User; face recognion accuracy rate ≥ 99%
●
50,000 face capacity, 50,000 card capacity, and 100,000 event capacity
●
Suggested height for face
recognion: between 1.4 m and 1.9 m
●
Supports 6 aendance status, including check in, check out, break in, break out, overme in,
overme out
●
Watchdog design and tamper funcon
●
Audio prompt for
authencaon result
●
NTP, manually me synchronizaon, and auto synchronizaon
●
Connects to external access controller or Wiegand card reader via Wiegand protocol
DS-K1TA70 Series Face Recognion Terminal User Manual
1