HIKVISION DS-K1TA70 Series User Manual

Note
If you select the enrollment staon, you should click Login, and set IP address, port No., user
name and password of the device.
5.
Click Import to start imporng the person informaon to the client.
Note
Up to 2,000 persons and 5,000 cards can be imported.
The person informaon, including person details, and the linked cards (if congured), will be
imported to the selected organizaon.
9.4.18 Move Persons to Another
Organizaon
You can move the added persons to another organizaon if you need.
Before You Start
●
Make sure you have added at least two
organizaons.
●
Make sure you have imported person informaon.
Steps
1.
Enter Person module.
2.
Select an
organizaon in the le panel.
The persons under the organizaon will be displayed in the right panel.
3.
Select the person to move.
4.
Click Change
Organizaon.
5.
Select the
organizaon to move persons to.
6.
Click OK.
9.4.19 Issue Cards to Persons in Batch
The client provides a convenient way to issue cards to mulple persons in a batch.
Steps
1.
Enter Person module.
2.
Click Batch Issue Cards.
All the added persons with no card issued will be displayed in the right panel.
3.
Oponal: Enter key words (name or person ID) in the input box to lter the person(s) that need
issuing cards.
4.
Oponal: Click Sengs to set the card issuing parameters. For details, refer to Issue a Card by
Local Mode.
5.
Click
Inialize to inialize the card enrollment staon or card reader to make it ready for issuing
cards.
6.
Click the Card No. column and enter the card number.
DS-K1TA70 Series Face Recognion Terminal User Manual
128

HIKVISION DS-K1TA70 Series Specifications

General

Brand	HIKVISION
Model	DS-K1TA70 Series
Category	Touch terminals
Language	English