Honda BF90D - 6 Pre-Operation Checks; Engine Cover Removal;Installation

Perform the following
pre-operation checks with the
engine stopped.
Do not operate the outboard
motor without the engine cover.
Exposed moving parts can
cause injury.
52
Engine Cover Removal/Installation
PRE-OPERATION CHECKS
6.
LATCH
(front/rear)
ENGINE COVER
FIXING LEVER
(front/rear)
BF75D/90D is 4-stroke, water cooled
outboard motor which uses unleaded
regular gasoline for fuel. It also
requires the engine oil. Check the
following before operating the
outboard motor.
To remove, raise the front and rear
engine cover fixing levers and
remove the engine cover.
To install, set the engine cover,
hook the front and rear latches,
and push down the front and rear
engine cover fixing levers.