Honda BF90D User Manual

42
CONTROLS AND FEATURES (Common)
Trim Tab
If the steering wheel/handle is pulled
to the side while running at full
speed, adjust the trim tab so that the
boat runs straight ahead.
Remove the gear case grommet.
Loosen the tightening bolt and turn
the trim tab right or left to adjust (see
page 111).
Anode
The anode metal is a sacrificed metal
which protects the outboard motor
from corrosion.
Do not paint the anode. It
deteriorates the function of the
anode metal, which can lead to rust 
and corrosion damage to the
outboard motor.
GEAR CASE GROMMET
TIGHTENING BOLT
TRIM TAB
ANODE
(each side)
ANODE 
(stern bracket)
<;DQQMࡍ࡯ࠫ㧞㧜㧝㧟ᐕ㧝㧜᦬㧝㧤ᣣޓ㊄ᦐᣣޓඦᓟ㧞ᤨ㧟㧟ಽ

Honda BF90D Specifications

General

Bore & Stroke	73 mm x 89.4 mm
Horsepower	90 HP
Cooling System	Water Cooled
Starting System	Electric
Gear Ratio	2.33:1
Trim Range	-4° to +16°
Tilt Range	70°
Dry Weight	163 kg (359 lbs)
Lubrication	Wet Sump
Recommended Fuel	Unleaded Gasoline (86 Octane or higher)
Gear Shift	F-N-R
Steering	Remote
Trim Method	Power Trim and Tilt
Displacement	1496 cc
Exhaust	Through propeller
Alternator Output	44 Amps
Recommended Engine Oil	10W-30 FC-W
Shaft Length	20" or 25"
Engine Type	4-Stroke SOHC, 4 Cylinders
Fuel Delivery	Programmed Fuel Injection