Honda BF90D User Manual

125
MAINTENANCE
Tool Kit and Emergency Parts
The following tools and owner’s
manual are supplied with the
outboard motor for maintenance,
adjustment, and emergency repairs.
<Spare Emergency Stop Switch
Clip>
A spare emergency stop switch clip
does not come with R2, R3 type (see
page 31).
A spare emergency stop switch clip is
available from your outboard motor
dealer.
Always carry a spare emergency stop
switch clip onboard. The spare clip
may either be stored in the tool bag or
in an easily accessible location on the
boat.
8 × 10 mm WRENCH
PHILLIPS
SCREWDRIVER
GRIP
EMERGENCY STARTER ROPE
SPARK PLUG WRENCH
18 × 19 mm WRENCH
FUSE PULLER
TOOL BAG
<;DQQMࡍ࡯ࠫ㧞㧜㧝㧟ᐕ㧝㧜᦬㧝㧤ᣣޓ㊄ᦐᣣޓඦᓟ㧞ᤨ㧟㧟ಽ

Honda BF90D Specifications

General

Bore & Stroke	73 mm x 89.4 mm
Horsepower	90 HP
Cooling System	Water Cooled
Starting System	Electric
Gear Ratio	2.33:1
Trim Range	-4° to +16°
Tilt Range	70°
Dry Weight	163 kg (359 lbs)
Lubrication	Wet Sump
Recommended Fuel	Unleaded Gasoline (86 Octane or higher)
Gear Shift	F-N-R
Steering	Remote
Trim Method	Power Trim and Tilt
Displacement	1496 cc
Exhaust	Through propeller
Alternator Output	44 Amps
Recommended Engine Oil	10W-30 FC-W
Shaft Length	20" or 25"
Engine Type	4-Stroke SOHC, 4 Cylinders
Fuel Delivery	Programmed Fuel Injection