Honda Outboard Motor BF75A User Manual

9. CLEANING AND FLUSHING
Thoroughly clean and flush the out-
board motor with fresh water after
operation in dirty or salty water.
Flushing with the Water Hose Joint
Do not run the engine dunng this
flushing procedure. For safety,remove
the emergency stop switch clip, so the
engine cannot be started while you
are standing near the propeller.
1. Remove the hose joint cap
2. Install the water hose joint in the
water joint.
3. Connect a water hose to the water
hose joint, and turn on the water
supply.
102

Honda Outboard Motor BF75A Specifications

General

Brand	Honda
Model	Outboard Motor BF75A
Category	Outboard Motor
Language	English