3. CONTROLS (REMOTE CONTROL TYPE)
Neutral Release Lever
The neutral release lever is on the
The remote control box is equipped
remote control lever to prevent an
with a key-type ignition switch.
accidental gear engagement.
Key positions:
The
remote control lever will not
engage forward or reverse gear, unless
the neutral release lever is pulled up.
Ignition
Switch
START
START
To activate the starter motor and start
the engine (the remote control lever
must be in the neutral position).
ON
To run the engine after starting (the
battery will discharge if the key
is
left in this position with the engine
not running).
OFF
To stop the engine (IGNITION
OFF).
To prevent the battery from dis-
charging, keep the key in the
OFF
position when the engine is not run-
ning.
20
To Next Page
Loading...
Need help?
General
