6. OPERATION (POWER TRIM/TILT)
Power Trim/Tilt System
The power trim/tilt system can adjust
the motor angle while cruising, or the
motor tilt angle while mooring. Motor
trim angle adjustment is necessary to
compensate for boat load or weight
distribution, water conditions, pro-
peller or engine condition.
The motor trim angle can be adjusted
while accelerating or cruising to obtain
the maximum boat speed, optimum
boat stability, and fuel economy.
Under normal conditions, the boat
will achieve optimum boat performance
when the engine is running at maxi-
mum rpm and the ventilation plate is
level with the water.
Press either the UP or DN portion of
the power trim/tilt switch, and trim
the motor to the best position for
the cruising conditions.
The power trim/tilt system operates
when the switch is pressed,a.nd it stops
when the switch is released.
84
. .
-:
?
\
POWER TRIil/TILT SWITCH
POWER TRIM/TILT SWITCH
YOWER TRIM/TILT SWITCH
POWER TRIM/TILT SjVlTCH
POWER TRIM/TILT SWITCH
To Next Page
Loading...
Need help?
General
